Nature3D PA12-CF

Nature3D PA12-CF 是一款高性能3D打印耗材，專為工業應用而開發。具有高強度、高耐磨、耐高溫等特點。由基於PA12的碳纖維增強尼龍材料生產。通過配方調整，材料的吸水率降低到普通PA耗材的1/10；碳纖維的增強不僅增加了材料的剛性，而且大大降低了材料的收縮率。打印時，只需普通加熱平台，無需使用封閉打印倉即可得到尺寸穩定、層間結合良好、表面光滑的模型。。该材料还具有非常好的耐温性，可以在150℃的环境下长时间工作。

Unique performance

• 高強度、高耐磨、耐高溫
• 吸水率降低到普通PA的1/10
• Easy to print
• 纖維的增強增加了材料的剛性，還降低了材料的收縮率
• 尺寸穩定、層間結合良好、表面光滑

General Printing Guide *

*) The Settings shown above are intended to guide you in finding the best print Settings. These ranges should work for most printers, but feel free to experiment outside these ranges.

Cleaning nozzle

When printing with filled/composite materials, it is recommended to clean the nozzle immediately after printing and feed PLA material 15-20cm long into the nozzle. This will ensure that any potential caulk flows out of the nozzle. Best usePLA Grow in dark, because extremely hard particles in the material are more likely to scrape residual waste from the nozzle.

Abradability

請注意，PA12-CF含有相對高濃度的極硬碳纖維，具有磨蝕性。一般來說，這些碳纖維會加速黃銅噴嘴的磨損，比未填充的材料快得多。我們建議使用不銹鋼或其他硬化合金製成的噴嘴。

Compliance *

ROHS | REACH | MSDS